What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?
Last Updated: 17.06.2025 14:13

This device then solves the entire problem.
At one ohm, the resistor has a maximum of 1 watt power.
I post the exact comment here.
the problem then depends on "how fast does the fuse operate?".
[image of Common-mode choke]
This one hit behind the barn.
Have you worn a tight black mini skirt?
For this case there are devices called Metal oxide varistors (MOV).
“ A fuse is a device which protects the (circuit) against overload and short circuit.”
what exactly is a ‘surge’ protector?
What do you say after "Hi" when chatting?
2024–10–14 [Omar Gharbi Omar Gharbi ]
2024–10–16 [ OO OLAOYE OYEBODE ]
So, the voltage could go up to 500 volts, and the fuse will not open up.
When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.
(Dc diagram shown, AC is similar).
First Sentence:
What are the popular niches to talk about as a content creator on the social media platform?
2024–10–00 [ Ammar Mahdi ] Ammar Mahdi
This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.
At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.
but I think this circuit , shows a few more pieces.
P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.
One
What is something brutally honest that needs to be said?
2024–10–11 [Bobby Sanchez Bobby Sanchez ].
If the nominal power is 4,000 watts then the current at 230volts is 16 amps.
The third is lightning and “how it gets conducted into a home.”
What kind of lights would you like to use for your home decor?
This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.
In schematic diagrams this is the symbol for a fuse:
Upvotes:
nine
These are simplified answers to the original question, and does not change anything I wrote above.
2024–10–11 [Victor Olarewsju Victor Olarewaju ]
Fighters react to Kamaru Usman's rebound win vs. Joaquin Buckley at UFC on ESPN 69 - MMA Junkie
What is lightning?
And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.
The bolt then partially travels down the line to your home.
What is your first experience having sex with older men?
eight
Edit 2024–10.
but this device (an Inductor) … impedes the rapid changes in the current.
Do you suck dicks with no reciprocation?
An AC voltage/ current source, and an ac inductive load.
Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.
A fuse is a non-resetable over current circuit protector.
What is it like to be a Christian in Iran?
But… the neutral is now “floating” because of the 1 ohm resistance.
Because the load is inductive, the current lags the voltage.(by a bit).
This is where this question deviates from being a 'generic' question, and becomes more specific.
What is the lowest probability event you have personally witnessed?
He then describes Rainy Season and Lightning.
What does a fuse do?
There are three different concepts here that are getting confused.
The other is “what does a “fuse” do?”
There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.
The MOV will conduct when the voltage exceeds 50% of line voltage.
a photo is worth a thousand words.
Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.
Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.
2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?
2024–10–10[John johnson John Johnson ]
This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.
At least they know the answer if they wanted it.
It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.
[old diagram got deleted by accident]
Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.
“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”
So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.
This is the picture of an electronic coil of wire wound around a core of magnetic material.
He then describes the function of a fuse.
It seems Mohan does not understand the difference between a comment and an Answer.
Can the fuse protect the electronic devices from lightning instead of a surge protector.
so, what happens?
So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.
so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.
OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.
But it can get overloaded, and no longer works.
Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.
There are two important concepts here.
Barnstars:
This is 'the assistant's answer'
“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”
One is “what exactly is in a ‘surge protector’ ? ”
These devices are installed between the “hot” and “neutral” and protective ground.
(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).
It also is a device that limits the change in current flow.
This is where the MOV conducts again, and dissipated the energy.
But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).
Here is a simplified AC power diagram.
Now when you have a certain ac resistance, then a current flows in a loop.
Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".
A circuit breaker is similar, but is resettable.
He then asserts :